THICK LAYER COATING 1K AND 2K

 

DOBAU®-1K, DOBAU®-2K und DOBAU®-2KS are classics for the cellar sealing. These environmental friendly and water based products protect your building permanently.
Whether moisture, non-accumulating or even accumulating leachate, for every load case we do have the suitable product. Of course tested from an independent authority and with general building inspection certificate.

 

 

 

 

 

 

 

PRODUCT NAME Picture MAIN USE
KIND OF PRODUCT
UNIT Quantity/
PALLET
PDF
DOBAU®-1K The paste like thixotropic coating is used for sealing against ground moisture, non-accumulating leachate at ground plates and at walls of ground reaching building parts as well as for sealing against non-pressing water at roof areas. Furthermore it is used for the interior sealing of floor areas in cellars. Consumption: 4-6 l/m² depending on the application and substrate. One component bitumen-plastic emulsion filled with polystyrene foam in accordance with DIN 18195, part 4 and 5 12 l
28 l
44
18

DOBAU®-2K
The paste like thixotropic coating is used for the sealing against ground moisture, non-accumulating leachate at ground plates and at walls of ground reaching building parts as well as for sealing against non-pressing water at roof areas and for the sealing against accumulating leachate at ground plates and at walls of ground reaching building parts. Consumption: 4-8 kg/m² depending on the application and substrate. Two-component fibre-reinforced bitumen-plastic emulsion in accordance with DIN 18195, part 4, 5 and 6 28 kg
(21+7)
18

DOBAU®-2KS For the sealing of mineral substrates against ground moisture and non-accumulating leachate of ground reaching building parts as well as for the sealing of accumulating leachate at ground plates and at walls at ground reaching building parts. Consumption: 4-8 l/m² depending on the application and substrate... High flexible two-component fibre-reinforced plastic modified bitumen emulsion filled with polystyrene foam in accordance with DIN 18195, Part 4, 5 and 6 30 l
(25+5)
18

DOBAU®-Glasgittergewebe Reinforcing material for streak-free or holohedral insertion in the area of the structure sealing, especially at the sealing with DOBAU® -1K, DOBAU® - 2K and DOBAU® -2k S. Stitch width: approx. 4 x 5 mm Reinforcing material with shear-resistant equipment Width:
100 cm
Length:
100 m
on enquiry

DOBAU®-Glasseidengewebe Reinforcing material for streak-free or holohedral insertion in the area of the structure sealing, especially at the sealing with DOBAU® - Plast D, DOBAU® - Plast S and especially with DOBAU® - FLEX SME. Stitch width: approx. 1,3 x 2,2 mm Reinforcing material in the area of the structure sealing Width:
25 cm
33 cm
50 cm
100 cm
Length:
50 m
on enquiry